CAT. NO MP15
The TCI MP15 is a 15 Watt electronic, constant current, remote driver available to power Hunza series version PURE LED fixtures. It includes a DIP-SWITCH control system that enables the unit to be set at a range of current outputs from 60mA to 360mA. Not dimmable, other than by the DIP-SWITCH control. For exterior use, it is highly recommended to install this in a weatherproof box, available as an option from Hunza. The PC-17-02 weatherproof box is a requirement for UL compliance. When this driver is used as a remote power supply, SERIES WIRING is required to connect the fixtures. Please refer to the Hunza PURE LED Series Wiring page for more information on wiring diagrams and fixture loads per driver.
Input Voltage: 90-264Vac 50-60Hz, 170-280Vdc
Output Voltage: 0V-41.5V dc
Output Current: 60 – 360mA (depending on DIP-SWITCH setting)
Wattage: 2.5W – 15W (depending on DIP-SWITCH setting)
Temperature range: -25...+45oC, max 75oC
Driver Weight: 0.065kg (2.3oz)
Standards: IP20, EN, CE, CSA, UL Recognized
Ordering Code: MP15
Please refer to the LED Power Supply page for detailed information on power supply selection and wiring.
If you have an enquiry regarding any of our products or have any feedback/comments you would like to share, please feel free to Contact Us and we will endeavour to get back to you as soon as we can.
Hunza specification sheets may change without notice.
Copyright © 2014 HUNZA Productions Ltd. All right reserved. Website by Kadabra NZ